Repair: The computer appears to be configured correctly but the device or resource is unresponsive in Windows 10

Who I am
Marie-Ange Demory

Author and references

When running a network diagnostic to resolve a non-connectivity issue, the troubleshooter may display a "The computer appears to be configured correctly but the device or resource is not responding"error message. To solve this problem, follow these simple solutions on your computer.

Fix-1 Empty DNS settings

1.Press Tasto Windows + R have lunch run.

2. Digita “cmd"To run window and press"Log in".

2. Now, run the following command in the command prompt window.

netsh int ip reset reset.log

3. To clear the DNS and re-register it copy paste these two commands in the Window System Symbol file then knocks Log in.

ipconfig /flushdns ipconfig /registerdns

4. To release and update the IP configuration data, run the following commands on the terminal.

ipconfig /release ipconfig /registerdns netsh winsock reset ipconfig /renew

Wait a few minutes for the process to complete.

Try to connect to the website, check if the problem persists or not.

Fix-2 Set IPv4 settings to automatic-

IPv4 tune automatic configuration will solve this problem.

1. Click on the Windows icon and type “Network connections".

2. Then you need to click on "View network connections“To access it.

4. The list of available adapters will be displayed.

5. To access the properties of the adapter, the right mouse button on the network card you are having problems with, then click "Property".

4. To access the IPv4 configuration file, you need to double click in "Internet Protocol Version 4 (TCP / IPv4)".

5. First, click the radio button next to the "Ottieni automatically an IP indirizzo".

6. Likewise, select "Obtain DNS server address automatically"option.

7. Finally, click on "ok".

8. Now, double click on him "Internet Protocol Version 6 (IPv6)"Setting.

9. After that, check these two options.

Obtain an IPv6 address automatically Obtain DNS server address automatically

10. Then select the option "Validate configurations on exit".

Click on "ok“To save the settings.

The configuration will be verified by your system. Near the window network connections.

Restart your computer to save the changes to your computer.

Note: If the above method doesn't work, please change the DNS settings for IPv4 settings to Google DNS.

for. To do this, simply click on Use the following DNS server address.

second. Then enter on a preferred DNS server and on an alternate DNS server.

After that, click ok and try again.

Fix - 3 Update or reset the adapter driver

Update the driver if you are using an old driver.

1. Simply press the button Tasto Windows + R keys.

2. Then write "ncpa.cpl“And then press Log in.

3. Look carefully for the network card you are trying to use on your computer.

4. Press Tasto Windows + R have lunch running.

5. Then write "devmgmt.msc“And hit Log in.

6. Click on 'Network adapters“To list available adapter drivers.

7. After that, the right mouse button in the network card driver, then click "Update Driver".

8. To allow Windows to search for drivers, choose the "Automatically searches for drivers".

Restart once the update process is complete.

If you recently received an update for your network driver, consider rolling back the update.

1. Access the Device Administrator file again on your computer.

2. Likewise, expand the network card section e double click on the adapter you are using.

3. Then go to "driverEyelash ".

4. Next, click on “Reset controller".

The driver update will be reset from your device.

Solution 4: disable proxy settings

According to some users, this problem is caused by poorly configured proxy settings in IE.

1. Right-click on Windows icon and then click "run".

2. When Run appears, type “inetcpl.cpl“. Click on “ok".

3. In the Internet Options window, you need to click on “ConnectionsEyelash ".

4. After that, you need to click on "LAN settings".

5. Simply, check the box next to the "Automatically detect settings".

6. To save the settings, click "ok".

7. Finally, click on "To apply"And then click"ok“To save the changes.

Now try to verify the connection again.

Fix 5: changing the power settings

Changing the power settings should allow the adapter to use power at all times.

1. Just type "devmgmt“In the search box.

2. A simple swipe on Log in and to open Device Manager.

3. Again double click on your network card.

4. Go to “Energy managementEyelash ".

5. Here alone deselect the option "Allow the computer to turn off this device to save power:'.

Then click on "ok“To save the settings on your computer.

Restart the device.

If this solution didn't work, look for the next one.

add a comment of Repair: The computer appears to be configured correctly but the device or resource is unresponsive in Windows 10
Comment sent successfully! We will review it in the next few hours.